JCB 250 Skid Steer Loader

Capacities

Engine coolant 6 gal (22 l)
Engine Oil 4 gal (15 l)
Fuel Tank 27 gal (103 l)
Hydraulic system 15 gal (55 l)

Dimensions

Angle of departure 29 degrees
Bucket corner Turning radius 8 ft (2 m)
Dig Depth 394 in (1,000 cm)
Dump angle 42 degrees
Dump Height 8 ft (2 m)
Ground Clearance 10 in (25 cm)
Loadover height 9,515 ft (2,900 m)
Max. reach @ full height 3 ft (1 m)
Overall height 7 ft (2 m)
Overall Length 153 in (388 cm)
Pin height 11 ft (3 m)
Quick hitch Turning radius 5 ft (2 m)
Reach @ ground level 4 ft (1 m)
Rear chassis turning radius 6 ft (2 m)
Rollback – Ground Level 30 degrees
Wheelbase 4 ft (1 m)
Width over tires 71 in (180 cm)

Engine

Alternator 95 amps
Aspiration Turbo
Battery 12 V
Cooling system Diesel
Displacement 4,399 cu in (72,087 cu cm)
Emissions Certification EPA-T4F (EU St3B)
Engine Model EcoMAX TCAE-55
Engine oil service interval 500 hours
Fuel Diesel
Gross Power 74 hp (55 kw)
Hydraulically driven cooling fan Yes
Max Torque 295 lbs ft (400 nm)
Power Measured @ 2400 rpm
Torque Measured @ 1200 rpm

Hydraulic System

Pump Flow Capacity 24 gpm (90 lpm)
Relief Valve Pressure 483.8 psi

Loader

Breakout Force 6,543 lbs (2,968 kg)
Bucket Capacity 1 cu yd (0 cu m)
Bucket Width 78 in (199 cm)
Loader lift capacity with bucket 5,884 lbs (2,669 kg)
Operating Load Rating 2,250 lbs (1,021 kg)
Operating Width 72 in (183 cm)
Tipping Angle 5055.2 degrees

Operating Specifications

Operational Weight 8,215 lbs (3,726 kg)

Tires

Standard 12 x 16.5 – 10 PR Xtra Wall Off Road

Transmission

Model Two Speed
Travel Speed 12 mph (19 kph)
Ask A Question