JCB 300 Skid Steer Loader

Dimensions

Angle of departure 29 degrees
Clearance at Max Lift and Dump 8 ft (2 m)
Dig Depth 394 in (1,000 cm)
Dump angle 42 degrees
Dump Height 8 ft (2 m)
Ground Clearance 10 in (25 cm)
Height – Top of Cab 7 ft (2 m)
Length with Bucket 13 ft (4 m)
Loadover height 9,515 ft (2,900 m)
Pin height 10,499 ft (3,200 m)
Reach at Max Lift and Dump 36 in (90 cm)
Rollback – Ground Level 30 degrees
Turning Radius from Center – inc bucket 87 in (220 cm)
Turning Radius from Center – machine rear 69 in (176 cm)
Wheelbase 4 ft (1 m)
Width Over Tires 6 ft (2 m)

Engine

Aspiration Turbo
Battery 12 V
Cooling system Liquid
Displacement 268 cu in (4,392 cu cm)
Emissions Certification EPA-T4F (EU St3B)
Engine Model EcoMAX TCAE-55
Engine oil service interval 500 hours
Fuel Diesel
Gross Power 74 hp (55 kw)
Max Torque 295 lbs ft (400 nm)
Power Measured @ 2400 rpm
Torque Measured @ 1200 rpm

Hydraulic System

Pump Flow Capacity 24 gpm (90 lpm)
Relief Valve Pressure 3335 psi

Loader

Breakout Force 6,543 lbs (2,968 kg)
Bucket Capacity 1 cu yd (0 cu m)
Bucket Width 75 in (190 cm)
Loader lift capacity with bucket 6,056 lbs (2,747 kg)
Operating Load Rating 3,000 lbs (1,361 kg)
Operating Width 72 in (183 cm)
Tipping Angle 6369.2 degrees

Operating Specifications

Alternator Supplied Amperage 95 amps
Chain Box Fluid Capacity – each side 6 gal (23 l)
Cooling System Fluid Capacity 4 gal (16 l)
Engine Oil Fluid Capacity 4 gal (15 l)
Fuel Capacity 27 gal (103 l)
Hydraulic System Fluid Capacity 15 gal (55 l)
Max Speed 12 mph (20 kph)
Operating Speed 7 mph (11 kph)
Operating Voltage 12 volts
Operational Weight 9,288 lbs (4,213 kg)
Tire Size 12 x 16.5

Tires

Standard 12 x 16.5 – 10 PR Xtra Wall Off Road

Transmission

Model Two Speed
Travel Speed 13 mph (20 kph)
Ask A Question