Contents
3-Point Hitch
| Category | Category 1 |
| Lift capacity (24-in. behind link arms) | 615 kg (1,356 lbs) |
Dimensions
| Approximate shipping weight (open-station, cab) | 1007.9 kg |
| Front Axle Clearance | 14 in (36 cm) |
| Turning radius with brakes | 3 m (9 ft) |
| Turning radius without brakes | 10 ft (3 m) |
| Wheelbase | 63 ft (19 m) |
Electrical System
| Alternator (12-V) | 75 amp |
| Battery size | 500 CCA |
| Starter size | 2 hp (1 kw) |
Engine
| Air cleaner | Dual element |
| Aspiration | Turbocharged |
| Bore | 3 in (9 cm) |
| Compression ratio | 19.1:1 |
| Cooling system | Water pump |
| Cylinder liners | Cast-In-Block |
| Displacement | 96 cu in (1,572 cu cm) |
| Emissions compliance | Final Tier 4 |
| Engine Manufacturer | Yanmar |
| Engine Model | 3TNV86CT-NJT |
| Engine torque at rated speed | 105 Nm |
| Engine Type | Diesel |
| Family | FYDXL1.57TDA, EYDXL1.57TDA, GYDXL1.57TDA |
| Fuel tank capacity | 8 gal (29 l) |
| Gross Power | 37 hp (27 kw) |
| Injection pump type | High pressure common rail direct injection |
| Lubrication | Pressurized |
| Number of Cylinders | 3 |
| Power take-off (PTO) power | 30 hp (22 kw) |
| Rated engine speed | 2500 rpm |
| Stroke | 4 in (9 cm) |
Final Drive
| Differential lock | Yes |
| Final Drive Type | Bull Gear |
Fluid Capacities
| Crankcase with filter | 4.8 L |
| Transmission and hydraulic system | 21.0 L |
Fuel System
| Fuel System Type | High pressure common rail direct injection |
Hydraulic System
| Draft control sensing | Position control |
| Hydraulic Type | Open Center |
| Maximum operating pressure | 2500 psi |
| Pump rated output | Steering – 15.0 L/min, Implement – 20.2 L/min |
| Pump Type | Dual gear |
| Remote control valves available | Up to two (optional) |
Operator Station
| Gear shift location – console/floor | Left Hand Side |
| Platform – flat/straddle | Semi-flat |
| Rollover protective structure | Rigid, ASAE S478 |
Power Take-Off (PTO)
| Brake (for mid and rear PTO) | Multiple wet disc |
| Clutch | Multi disc, wet |
| Control | Independent |
| Standard | Rear – 540 rpm |
Tires
| Front Tires Size | Farm – 7-14, Turf – 27×8.5-15, R4 – 25×8.5-14, R4 – 27×8.5-15 |
| Rear Tires Size | Farm – 11.2-24, Turf – 41×14-20, R4 – 15-19.5, R4 – 43×16-20 |
Transmission
| Axle capacity | Front – 798 kg, Rear – 1197 kg |
| Brakes | Wet disc |
| Cruise control | Optional |
| Differential lock | Yes |
| Final Drive Type | Bull Gear |
| Left-hand reverser | No |
| Standard transmission, forward/reverse | Hydrostatic transmission (HST) |
| Steering | Power steering |
