Caterpillar 906H2 Wheel Loader

Bucket

Bucket Capacities 2 cu yd (1 cu m)

Cab

FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
ROPS SAE J1040 MAY94, ISO 3471-1994

Dimensions

Ground Clearance 1 ft (0 m)
Hinge Pin – Max Height 11 ft (3 m)
Length with Bucket on Ground 18 ft (6 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheel Base 7 ft (2 m)
Wheelbase 7 ft (2 m)

Engine

Bore 4 in (9 cm)
Engine Model C3.3B DIT
Gross Power 74 hp (55 kw)
Maximum Gross Power – ISO 14396 73 hp (54 kw)
Maximum Gross Power – SAE J1995 74 hp (55 kw)
Maximum Net Power – ISO 9249 69 hp (51 kw)
Maximum Net Power – SAE J1349 68 hp (51 kw)
Net Power 69 hp (51 kw)
Rated Net Power – 2,500 rpm – SAE J1349 68 hp (51 kw)
Stroke 5 in (12 cm)

Hydraulic System

Dump Time 2 seconds
Lower Time 4 seconds
Main Relief 3400 psi
Pump Flow Capacity 22 gpm (83 lpm)
Pump Type PISTON
Raise Time 5 seconds
Relief Valve Setting 3400 psi

Operating Specifications

Breakout Force 9,442 lbs (4,283 kg)
Cooling System Fluid Capacity 6 gal (24 l)
Engine Oil Fluid Capacity 3 gal (10 l)
Fuel Capacity 14 gal (52 l)
Full Turn Static Tipping Load – Bucket 6,967 lbs (3,160 kg)
Hydraulic Lift Capacity 7,194 lbs (3,263 kg)
Hydraulic System Fluid Capacity 25 gal (95 l)
Operating Weight 4,553 lbs (2,065 kg)
Rack Back – Transport Position 52 degrees
Rated Bucket Capacity 1 cu yd (1 cu m)
Rated Operating Load at Full Turn – Bucket 3,483 lbs (1,580 kg)
Rated Operating Load at Full Turn – Forks (EN 474-3:2006, Firm and Level Ground, 500 mm (20 in) Load Center, Transport 100 mm (4 in) Above Ground) 5,997 lbs (2,720 kg)
Straight Tipping Load – Bucket 8,785 lbs (3,985 kg)
Tire Size 405/70 R18

Service Refill Capacities

Cooling System 6 gal (24 l)
Engine Oil 3 gal (10 l)
Fuel Tank 14 gal (52 l)
Hydraulic System 25 gal (95 l)

Transmission

Max Speed – Forward 22 mph (35 kph)
Number of Forward Gears 3
Travel Speed 1 4 mph (7 kph)
Travel Speed 2 12 mph (20 kph)

Weights

Operating Weight 12,412 lbs (5,630 kg)
Ask A Question