Contents
- Bucket
- Cab
- Cab Features – Canopy
- Dimensions – With ISO Coupler – Approximate
- Dimensions – With SSL Coupler – Approximate
- Dimensions with Bucket (Approximate) – Standard Lift – With ISO Coupler
- Dimensions with Bucket (Approximate) – Standard Lift – With SSL Coupler
- Drive System
- Engine
- Hydraulic System
- Loader Hydraulic System
- Maximum Material Densities – General Purpose Bucket
- Maximum Material Densities – Light Material Bucket
- Maximum Material Densities – Multi Purpose Bucket
- Operating Specifications
- Operating Specifications – ISO Coupler
- Operating Specifications – SSL Coupler
- Service Refill Capacities
- Steering System
- Tires
- Travel Speeds
- Weights
Bucket
| Bucket Capacities | 2 cu yd (1 cu m) |
| Bucket Capacities – ISO Coupler | 0.75-1.2 m3 |
| Bucket Capacities – SSL Style Coupler | 1-2 cu yd (1-1 cu m) |
| General Purpose | 1.31 yd |
| Light Material | 2 cu yd (1 cu m) |
Cab
| FOPS | SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| ROPS | SAE J1040 MAY94, ISO 3471-1994. |
Cab Features – Canopy
| External Knock Back Mirrors | Standard |
| Lockable Storage Box | Standard |
Dimensions – With ISO Coupler – Approximate
| Dig Depth | 4 in (9 cm) |
| Turning Radius – Inside Tire | 7 ft (2 m) |
| Turning Radius – Over Bucket | 15 ft (4 m) |
Dimensions – With SSL Coupler – Approximate
| Dig Depth | 4 in (9 cm) |
| Turning Radius – Inside Tire | 7 ft (2 m) |
| Turning Radius – Over Bucket | 15 ft (5 m) |
Dimensions with Bucket (Approximate) – Standard Lift – With ISO Coupler
| Articulation Angle | 39 degrees |
| Clearance – Bucket at 45 degrees * | 8 ft (2 m) |
| Clearance – Level Bucket** | 10 ft (3 m) |
| Departure Angle | 33 degrees |
| Dig Depth** | 4 in (9 cm) |
| Dump Angle at Full Lift | 45 degrees |
| Height – Bucket Pin** | 11 ft (3 m) |
| Height – Ground Clearance** | 1 ft (0 m) |
| Height – Ground to Cab** | 9 ft (3 m) |
| Length – Overall* | 18 ft (5 m) |
| Length – Wheel Base | 7 ft (2 m) |
| Machine Width | 6 ft (2 m) |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Reach – Bucket at 45 degrees* | 2 ft (1 m) |
| Turning Radius – Inside of Tires | 7 ft (2 m) |
| Turning Radius – Over Bucket | 15 ft (4 m) |
| Width – Bucket | 7 ft (2 m) |
| Width – Tread Center | 5 ft (1 m) |
Dimensions with Bucket (Approximate) – Standard Lift – With SSL Coupler
| Articulation Angle | 39 degrees |
| Clearance – Bucket at 45 degrees * | 8 ft (2 m) |
| Clearance – Level Bucket** | 10 ft (3 m) |
| Departure Angle | 33 degrees |
| Dig Depth** | 4 in (11 cm) |
| Dump Angle at Full Lift | 45 degrees |
| Height – Bucket Pin** | 11 ft (3 m) |
| Height – Ground Clearance** | 1 ft (0 m) |
| Height – Ground to Cab** | 9 ft (3 m) |
| Length – Overall* | 19 ft (6 m) |
| Length – Wheel Base | 7 ft (2 m) |
| Machine Width | 6 ft (2 m) |
| Reach – Bucket at 45 degrees* | 3 ft (1 m) |
| Turning Radius – Inside of Tires | 7 ft (2 m) |
| Turning Radius – Over Bucket | 15 ft (4 m) |
| Width – Bucket | 7 ft (2 m) |
| Width – Tread Center | 5 ft (1 m) |
Drive System
| Forward – High Range | 22 mph (35 kph) |
| Forward – Range 1 | 6 mph (10 kph) |
| Forward – Range 2 | 12 mph (19 kph) |
| Reverse – High Range | 22 mph (35 kph) |
| Reverse – Range 1 | 6 mph (10 kph) |
| Reverse – Range 2 | 12 mph (19 kph) |
Engine
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. |
| Engine Model | Cat C3.3B DIT* |
| Maximum Gross Power | 73 hp (54 kw) |
| Maximum Gross Power – ISO 14396 | 73 hp (54 kw) |
| Maximum Gross Power – ISO 14396 (DIN) | 74 hp (55 kw) |
| Maximum Gross Power – SAE J1995 | 74 hp (55 kw) |
| Maximum Gross Torque – ISO 14396 | 192 lbs ft (260 nm) |
| Maximum Net Power – ISO 9249 | 69 hp (51 kw) |
| Maximum Net Power – SAE J1349 | 68 hp (51 kw) |
| Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 | 191 lbs ft (259 nm) |
| Maximum Net Torque – SAE J1349 | 189 lbs ft (256 nm) |
| Net Power | 74 hp (55 kw) |
| Note (5) | The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. |
| Rated Net Power – 2,400 rpm – ISO 9249 (1977)/EEC 80/1269 | 74 hp (55 kw) |
| Rated Net Power – 2,400 rpm – SAE J1349 | 73 hp (54 kw) |
| Rated Net Power – 2,500 rpm – SAE J1349 | 68 hp (51 kw) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Cycle Time – Dump | 1.3 seconds |
| Hydraulic Cycle Time – Lift | 5.2 seconds |
| Hydraulic Cycle Time – Lower | 3.2 seconds |
| Hydraulic Cycle Time – Rackback | 2.1 seconds |
| Main Relief – 3rd Aux Flow | 3400 psi |
| Main Relief – 3rd Aux Flow: High Flow | 31 gpm (117 lpm) |
| Main Relief – 3rd Aux Flow: Standard | 20 gpm (76 lpm) |
Loader Hydraulic System
| 3rd Function Maximum Working Pressure | 3408 psi |
| Boost Flow Maximum Pressure | 3191 psi |
| Hydraulic Cycle Time – 1,000 rpm – Dump, at Maximum Lift Height | 3 seconds |
| Hydraulic Cycle Time – 1,000 rpm – Float Down, Maximum Lift to Ground Level | 2.6 seconds |
| Hydraulic Cycle Time – 1,000 rpm – Raise, Ground Level to Maximum Lift | 9.6 seconds |
| Hydraulic Cycle Time – 1,800 rpm – Dump, at Maximum Lift Height | 1.5 seconds |
| Hydraulic Cycle Time – 1,800 rpm – Float Down, Maximum Lift to Ground Level | 2.6 seconds |
| Hydraulic Cycle Time – 1,800 rpm – Raise, Ground Level to Maximum Lift | 5.5 seconds |
| Hydraulic Cycle Time – 1,800 rpm – Total Cycle Time | 9.6 seconds |
| Lift Cylinder, Double Acting – Bore Diameter | 3 in (8 cm) |
| Lift Cylinder, Double Acting – Rod Diameter | 2 in (5 cm) |
| Lift Cylinder, Double Acting – Stroke | 27 in (70 cm) |
| Maximum Flow – Implement Pump | 19 gpm (72 lpm) |
| Maximum Flow – Implement Pump – Auxiliary Function High Flow | 31 gpm (117 lpm) |
| Maximum Flow – Implement Pump – Auxiliary Function Standard Flow | 19 gpm (72 lpm) |
| Maximum Working Pressure – Implement Pump | 3408 psi |
| Relief Pressure – Tilt Cylinder Head | 4496 psi |
| Relief Pressure – Tilt Cylinder Rod | 2756 psi |
| Tilt Cylinder, Double Acting – Bore Diameter | 4 in (9 cm) |
| Tilt Cylinder, Double Acting – Rod Diameter | 2 in (6 cm) |
| Tilt Cylinder, Double Acting – Stroke | 16 in (42 cm) |
Maximum Material Densities – General Purpose Bucket
| Bucket Width | 80 in (203 cm) |
| Dump Height | 94 in (239 cm) |
| Rated Capacity | 1 cu yd (1 cu m) |
Maximum Material Densities – Light Material Bucket
| Bucket Width | 82 in (208 cm) |
| Dump Height | 90 in (229 cm) |
| Rated Capacity | 2 cu yd (1 cu m) |
Maximum Material Densities – Multi Purpose Bucket
| Bucket Width | 74 in (188 cm) |
| Dump Height | 97 in (246 cm) |
| Rated Capacity | 1 cu yd (1 cu m) |
Operating Specifications
| Clearance – Full Lift and 45 degrees Dump | 8 ft (2 m) |
| Full Turn Tipping Load | 7,716 lbs (3,500 kg) |
| Operating Weight | 12,677 lbs (5,750 kg) |
| Rated Bucket Capacity | 1 cu yd (1 cu m) |
| Reach – Full Lift and 45 degrees Dump | 3 ft (1 m) |
| Steering Articulation Angle – Each Direction | 39 degrees |
| Tipping Load – Full Turn – ISO 14397-1 | 7,339 lbs (3,329 kg) |
| Tipping Load – Straight – ISO 14397-1 | 9,007 lbs (4,086 kg) |
Operating Specifications – ISO Coupler
| Breakout Force – Bucket | 11,689 lbs ft (15,848 nm) |
| Full Turn Static Tipping Load – Bucket | 8,289 lbs (3,760 kg) |
| Rack Back – Transport Position | 52 degrees |
| Rated Bucket Capacity | 1 cu yd (1 cu m) |
| Rated Operating Load at Full Turn – Bucket | 4,145 lbs (1,880 kg) |
| Rated Operating Load at Full Turn – Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center) | 5,051 lbs (2,291 kg) |
| Straight Tipping Load – Bucket | 10,174 lbs (4,615 kg) |
| Tire Size | 405/70 R18 |
Operating Specifications – SSL Coupler
| Breakout Force – Bucket | 9,442 lbs ft (12,801 nm) |
| Full Turn Static Tipping Load – Bucket | 7,716 lbs (3,500 kg) |
| Rack Back – Transport Position | 52 degrees |
| Rated Bucket Capacity | 1 cu yd (1 cu m) |
| Rated Operating Load at Full Turn – Bucket | 3,858 lbs (1,750 kg) |
| Rated Operating Load at Full Turn – Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center) | 4,674 lbs (2,120 kg) |
| Straight Tipping Load – Bucket | 9,469 lbs (4,295 kg) |
| Tire Size | 405/70 R18 |
Service Refill Capacities
| Cooling System | 5 gal (17 l) |
| Engine Crankcase | 3 gal (11 l) |
| Engine Oil | 3 gal (11 l) |
| Fuel Tank | 21 gal (78 l) |
| Hydraulic System | 19 gal (70 l) |
| Hydraulic Tank | 12 gal (46 l) |
| Transmission – Gear Box | 2 gal (8 l) |
Steering System
| Maximum Steering Torque – 0 degrees (Straight Machine) | 37,155 lbs ft (50,375 nm) |
| Maximum Steering Torque – 39 degrees (Full Turn) | 27,747 lbs ft (37,619 nm) |
| Maximum Working Pressure – Steering Pump | 3191 psi |
| Nominal Flow – Steering Pump | 12 gpm (45 lpm) |
| Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left | <,6 turns |
| Steering AC Cycle Times – Full Left to Full Right – 2,620 rpm | 3 seconds |
| Steering Articulation Angle – Each Direction | 39 degrees |
| Steering Cylinder, Double Acting – Bore Diameter | 3 in (8 cm) |
| Steering Cylinder, Double Acting – Rod Diameter | 1 in (4 cm) |
| Steering Cylinder, Double Acting – Stroke | 12 in (30 cm) |
Tires
| Note (1) | *Standard tire. |
| Note (2) | Other tire choices available, contact your Cat dealer for details. |
| Note (3) | In certain applications, the loader’s productive capabilities may exceed the tires’ tonnes-km/h (ton-) capabilities. |
| Note (4) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Option (1) | 335/80 R18 XZSL Michelin |
| Option (2) | 340/80 R18 AT-R Firestone |
| Option (3) | 340/80 R18 XMCL Michelin |
| Option (4) | 340/80 R18 TRI2 Nokian |
| Option (5) | 340/80 R18 Bibload Michelin |
| Option (6) | 405/70 R18 SPT9 Dunlop* |
| Option (7) | 12.5/80 R18 Flexport |
Travel Speeds
| High Speed | 22 mph (35 kph) |
| Speed 1 | 6 mph (10 kph) |
| Speed 2 | 12 mph (20 kph) |
Weights
| Operating Weight | 12,677 lbs (5,750 kg) |
