Caterpillar 910 Wheel Loader

Bucket

Breakout Force 11,632-16,291 lbs (5,276-7,389 kg)
Bucket Capacity – heaped 1 cu yd (1 cu m)
Bucket Width 7 ft (2 m)
Dump Clearance at Max Raise 8 ft (2 m)

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 10 ft (3 m)
Hinge Pin – Max Height 10 ft (3 m)
Length with Bucket on Ground 18 ft (5 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 8 ft (2 m)
Width Over Tires 7 ft (2 m)

Engine

Displacement 317 cu in (5,201 cu cm)
Engine Model C3.6
Net Power 65 hp (48 kw)
Number of Cylinders 4
Power Measured @ 2400 rpm

Hydraulic System

Dump Time 1.3 seconds
Lower Time 3.5 seconds
Pump Type double section gear
Raise Time 6 seconds
Relief Valve Setting 2500 psi

Operating Specifications

Alternator Supplied Amperage 40 amps
Cooling System Fluid Capacity 7 gal (25 l)
Engine Oil Fluid Capacity 3 gal (11 l)
Front Axle/Diff Fluid Capacity 4 gal (15 l)
Fuel Capacity 30 gal (113 l)
Hydraulic System Fluid Capacity 15 gal (57 l)
Operating Voltage 12 volts
Operating Weight 14,210-18,102 lbs (6,446-8,211 kg)
Rear Axle Oscillation 22 degrees
Rear Axle/Diff Fluid Capacity 4 gal (15 l)
Static Tipping Weight 9,877 lbs (4,480 kg)
Tire Size 15.5 x 25.8 PR
Transmission Fluid Capacity 6 gal (23 l)
Turning Radius 16 ft (5 m)

Transmission

Max Speed – Forward 15 mph (24 kph)
Max Speed – Reverse 7 mph (11 kph)
Number of Forward Gears 3
Number of Reverse Gears 1
Transmission Type Planetary power shift
Ask A Question