Contents
Axles
| Axle Oscillation | 12 degrees |
Bucket
| Bucket Capacities | 2-3 cu yd (2-2 cu m) |
| Bucket Capacity – struck | 2 cu yd (2 cu m) |
| Bucket Width | 8 ft (3 m) |
Cab
| FOPS | SAE J231 JAN81, ISO 3449-1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
Dimensions
| Bucket Pin Height – Maximum Lift | 12 ft (4 m) |
| Carry Height | 1 ft (0 m) |
| Centerline of Front Axle to Hitch | 5 ft (1 m) |
| Digging Depth | 4 in (10 cm) |
| Dump Angle at Maximum Lift | 45 degrees |
| Dump Clearance at Maximum Lift – 45 degrees | 9 ft (3 m) |
| Fork Tine Length | 4 ft (1 m) |
| Height – Center of Axle | 2 ft (1 m) |
| Height – Top of Hood | 85 in (216 cm) |
| Height – Top of ROPS/FOPS | 11 ft (3 m) |
| Hinge Pin – Max Height | 12 ft (4 m) |
| Length – Rear Axle to Bumper | 6 ft (2 m) |
| Length w/ Bucket on Ground | 24 ft (7 m) |
| Length with out Forks on Ground | 25 ft (8 m) |
| Length with Bucket on Ground | 23 ft (7 m) |
| Overall Height | 16 ft (5 m) |
| Overall Height – Bucket Raised | 16 ft (5 m) |
| Overall Length | 23 ft (7 m) |
| Rack Back Angle – Carry | 48 degrees |
| Rack Back Angle – Maximum Lift | 58 degrees |
| Reach at Maximum Lift and 45 degrees Dump | 2 ft (1 m) |
| Wheel Base | 9 ft (3 m) |
| Wheel Base Length | 9 ft (3 m) |
| Wheelbase | 9 ft (3 m) |
| Width – Over Tires | 8 ft (2 m) |
| Width Over Tires | 8 ft (2 m) |
Engine
| Bore | 4 in (10 cm) |
| Power Measured @ | 2300 rpm |
| Rated Net Power | 129 hp (96 kw) |
| Stroke | 5 in (13 cm) |
Hydraulic System
| Relief Valve Setting | 3756.5 psi |
Loader Hydraulic System
| Bore (1) | 4 in (11 cm) |
| Bore (2) | 5 in (12 cm) |
| Dump | 1.1 seconds |
| Lower, Empty, Float Down | 2.7 seconds |
| Pump Flow – Implement Pump | 40 gpm (152 lpm) |
| Raise | 5.2 seconds |
| Stroke (1) | 30 in (75 cm) |
| Stroke (2) | 21 in (52 cm) |
| Total | 9 seconds |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Articulation Angle | 40 degrees |
| Breakout Force | 21,727 lbs (9,855 kg) |
| Cooling System Fluid Capacity | 11 gal (40 l) |
| Dump Clearance at Full Lift and 45 degrees Dump Angle | 9 ft (3 m) |
| Engine Oil Capacity | 5 gal (20 l) |
| Engine Oil Fluid Capacity | 5 gal (20 l) |
| Front Axle/Diff Fluid Capacity | 6 gal (21 l) |
| Front Diff Fluid Capacity | 6 gal (21 l) |
| Operating Voltage | 24 volts |
| Reach – Full Lift and 45 degrees Dump | 2 ft (1 m) |
| Rear Axle Oscillation | 12 degrees |
| Rear Axle/Diff Fluid Capacity | 6 gal (21 l) |
| Rear Diff Fluid Capacity | 6 gal (21 l) |
| Static Tipping Load – Full Turn | 15,163 lbs (6,878 kg) |
| Static Tipping Weight | 17,359 lbs (7,874 kg) |
| Transmission Fluid Capacity | 6 gal (23 l) |
| Turning Radius | 17 ft (5 m) |
Service Refill Capacities
| Cooling System | 11 gal (41 l) |
| Crankcase | 4 gal (16 l) |
| Front | 6 gal (21 l) |
| Fuel Tank | 59 gal (225 l) |
| Hydraulic Tank | 19 gal (70 l) |
| Rear | 6 gal (21 l) |
| Transmission | 6 gal (23 l) |
Steering System
| Maximum Working Pressure | 3000 psi |
| Minimum Turning Radius – Over Tires | 200 in (508 cm) |
| Steering Angle – Each Direction | 40 degrees |
| Steering Cylinder, Two, Bore | 3 in (7 cm) |
Tires
| Size | 17.5-25PR (L-2) |
| Tread Width | 6 ft (2 m) |
Transmission
| Max Speed – Reverse | 14 mph (22 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | countershaft |
Weights
| Operating Weight | 23,920 lbs (10,850 kg) |
