Caterpillar 928G Wheel Loader

Axles

Axle Oscillation 11 degrees

Bucket

Breakout Force 25,849 lbs (11,725 kg)
Breakout Force – Reference Bucket 25,844 lbs (11,723 kg)
Bucket Capacities 3-3 cu yd (2-2 cu m)
Bucket Capacity – heaped 2 cu yd (2 cu m)
Bucket Capacity – struck 2 cu yd (2 cu m)
Bucket Width 8 ft (3 m)
Dump Clearance at Max Raise 10 ft (3 m)
Reference Bucket Capacity 3 cu yd (2 cu m)
Type – Reference bucket General purpose

Cab

FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II
ROPS SAE J1040 MAY94, ISO 3471-1994

Dimensions

Bucket Pin Height – Maximum Lift 12 ft (4 m)
Carry Height 3 ft (1 m)
Centerline of Front Axle to Hitch 5 ft (1 m)
Digging Depth 3 in (9 cm)
Dump Angle at Maximum Lift 45 degrees
Dump Clearance at Maximum Lift – 45 degrees 10 ft (3 m)
Ground Clearance 1 ft (0 m)
Height – Center of Axle 2 ft (1 m)
Height – Top of Cab 11 ft (3 m)
Height – Top of Hood 88 in (223 cm)
Height – Top of ROPS/FOPS 11 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length – Rear Axle to Bumper 6 ft (2 m)
Length with Bucket on Ground 24 ft (7 m)
Overall Height 16 ft (5 m)
Overall Height – Bucket Raised 16 ft (5 m)
Overall Length 23 ft (7 m)
Rack Back Angle – Carry 47.8 degrees
Rack Back Angle – Maximum Lift 58 degrees
Reach at Max Lift and Dump 3 ft (1 m)
Reach at Maximum Lift and 45 degrees Dump 3 ft (1 m)
Wheel Base 10 ft (3 m)
Wheel Base Length 10 ft (3 m)
Wheelbase 10 ft (3 m)
Width – Over Tires 6 ft (2 m)
Width Over Tires 8 ft (2 m)

Engine

Bore 4 in (10 cm)
Displacement 366 cu in (5,998 cu cm)
Engine Model 3056E DIT ATAAC
Gross Power 157 hp (117 kw)
Net Power 125 hp (93 kw)
Power Measured @ 2300 rpm
Rated Net Power 143 hp (107 kw)
Stroke 5 in (13 cm)

Hydraulic System

Dump Time 1.2 seconds
Lower Time 2.8 seconds
Pump Flow Capacity 40 gpm (152 lpm)
Pump Type fixed displacement vane-type implement pump
Raise Time 6.1 seconds
Relief Valve Setting 3597 psi

Loader Hydraulic System

Bore (1) 5 in (12 cm)
Bore (2) 5 in (13 cm)
Dump 1.2 seconds
Lower, Empty, Float Down 2.8 seconds
Pump Flow – Implement Pump 40 gpm (152 lpm)
Raise 6.1 seconds
Relief Valve Setting 3600 psi
Stroke (1) 27 in (69 cm)
Stroke (2) 22 in (55 cm)
Total 10.1 seconds

Operating Specifications

Alternator Supplied Amperage 80 amps
Articulation Angle 40 degrees
Breakout Force 25,844 lbs (11,723 kg)
Cooling System Fluid Capacity 11 gal (42 l)
Dump Clearance at Full Lift and 45 degrees Dump Angle 10 ft (3 m)
Engine Oil Fluid Capacity 4 gal (16 l)
Front Axle/Diff Fluid Capacity 7 gal (26 l)
Fuel Capacity 60 gal (225 l)
Hydraulic System Fluid Capacity 33 gal (125 l)
Operating Voltage 24 volts
Operating Weight 25,699 lbs (11,657 kg)
Reach – Full Lift and 45 degrees Dump 3 ft (1 m)
Rear Axle Oscillation 11 degrees
Rear Axle/Diff Fluid Capacity 7 gal (25 l)
Static Tipping Load – Full Turn 18,018 lbs (8,173 kg)
Static Tipping Weight 20,351 lbs (9,231 kg)
Tire Size 20.5-25 R25
Transmission Fluid Capacity 9 gal (35 l)
Turning Radius 17 ft (5 m)

Service Refill Capacities

Cooling System 11 gal (42 l)
Crankcase 4 gal (14 l)
Front 7 gal (26 l)
Fuel Tank 59 gal (225 l)
Hydraulic Tank 19 gal (70 l)
Rear 7 gal (25 l)
Transmission 9 gal (34 l)

Steering System

Maximum Working Pressure 3000 psi
Minimum Turning Radius – Over Tires 206 in (523 cm)
Steering Angle – Each Direction 40 degrees
Steering Articulation 40 degrees
Steering Cylinder, Two, Bore 3 in (7 cm)

Tires

Size 17.5-25PR (L-2)
Tread Width 96 ft (29 m)

Transmission

2 Forward 8 mph (13 kph)
3 Forward 16 mph (26 kph)
4 Forward 23 mph (38 kph)
Forward – 1 5 mph (8 kph)
Max Speed – Forward 23 mph (37 kph)
Max Speed – Reverse 15 mph (25 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Reverse – 1 5 mph (8 kph)
Transmission Type countershaft

Weights

Operating Weight 27,140 lbs (12,311 kg)
Ask A Question