Caterpillar 966H Wheel Loader

Axles

Front Fixed front
Maximum Single-Wheel Rise and Fall 20 in (50 cm)
Rear Oscillating +/- 13?

Brakes

Brakes Meets required standards.

Bucket

Breakout Force 42,300 lbs (19,187 kg)
Breakout Force – Reference Bucket 48,559 lbs (22,026 kg)
Bucket Capacities 6 cu yd (4 cu m)
Bucket Capacity – heaped 6 cu yd (4 cu m)
Bucket Capacity – struck 5 cu yd (4 cu m)
Dump Clearance at Max Raise 10 ft (3 m)
Maximum Bucket Capacity 6 cu yd (4 cu m)
Reference Bucket Capacity 5 cu yd (4 cu m)
Type – Reference bucket General purpose

Cab

ROPS/FOPS Meets SAE and ISO standards.

Dimensions

B-Pin Height – Standard 14 ft (4 m)
Centerline of Rear Axle to Hitch 68 in (173 cm)
Centerline Rear Axle to Edge of Counterweight 8 ft (2 m)
Ground Clearance 2 ft (1 m)
Height – Top of Cab 12 ft (4 m)
Height – Top of Exhaust 140 in (355 cm)
Height – Top of Hood 106 in (268 cm)
Height – Top of ROPS/FOPS 12 ft (4 m)
Hinge Pin – Max Height 14 ft (4 m)
Length with Bucket on Ground 29 ft (9 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheel Base 11 ft (3 m)
Wheelbase 11 ft (3 m)
Width Over Tires 10 ft (3 m)

Engine

Aspiration Turbocharged
Bore 5 in (13 cm)
Displacement 677 cu in (11,094 cu cm)
Engine Model Cat C11 ACERT
Flywheel Power 262 hp (195 kw)
Gross Power 286 hp (213 kw)
Gross Power – SAE J1995 286 hp (213 kw)
Make Cat
Model C11
Net Power 262 hp (195 kw)
Net Power – 80/1269/EEC 262 hp (195 kw)
Net Power – ISO 9249 262 hp (195 kw)
Net Power – SAE J1349 259 hp (193 kw)
Number of Cylinders 6
Peak Torque – 1,400 rpm – Net 896 lbs ft (1,215 nm)
Power Measured @ 1800 rpm
Stroke 6 in (14 cm)
Torque Measured @ 1400 rpm
Torque Rise 38%

Hydraulic System

Bucket/Work Tool System – Pump Output 81 gpm (305 lpm)
Dump Time 1.6 seconds
Hydraulic Cycle Time – Dump 1.6 seconds
Hydraulic Cycle Time – Lower, Empty, Float Down 2.4 seconds
Hydraulic Cycle Time – Raise 5.9 seconds
Hydraulic Cycle Time – Total 9.9 seconds
Lower Time 2.4 seconds
Pump Flow Capacity 81 gpm (305 lpm)
Pump Type Piston
Raise Time 5.9 seconds
Relief Valve Setting 1000 psi
Steering System – Pump Type Piston

Operating Specifications

Alternator Supplied Amperage 80 amps
Breakout Force 42,300 lbs (19,187 kg)
Cooling System Fluid Capacity 10 gal (39 l)
Dump Clearance 9,859 ft (3,005 m)
Engine Oil Fluid Capacity 9 gal (35 l)
Front Axle/Diff Fluid Capacity 17 gal (64 l)
Fuel Capacity 100 gal (380 l)
Hydraulic System Fluid Capacity 29 gal (110 l)
Operating Voltage 24 volts
Operating Weight 52,254 lbs (23,702 kg)
Rated Bucket Capacity 6 cu yd (4 cu m)
Rear Axle Oscillation 26 degrees
Rear Axle/Diff Fluid Capacity 17 gal (64 l)
Static Tipping Load – Full Turn 34,120 lbs (15,477 kg)
Static Tipping Weight 38,354 lbs (17,397 kg)
Tire Size 26.5-25
Transmission Fluid Capacity 12 gal (44 l)
Turning Radius 24 ft (7 m)

Service Refill Capacities

Cooling System 10 gal (39 l)
Crankcase 9 gal (35 l)
Differential – Final Drives – Front 17 gal (64 l)
Differential – Final Drives – Rear 17 gal (64 l)
Fuel Tank – Standard 100 gal (380 l)
Hydraulic Tank 29 gal (110 l)
Transmission 12 gal (44 l)

Tires

Tires Choose from a variety of tires to match your application.

Transmission

Forward – 1 4 mph (7 kph)
Forward – 2 8 mph (13 kph)
Forward – 3 14 mph (22 kph)
Forward – 4 23 mph (37 kph)
Max Speed – Forward 23 mph (37 kph)
Max Speed – Reverse 23 mph (37 kph)
Number of Forward Gears 4
Number of Reverse Gears 4
Reverse – 1 5 mph (7 kph)
Reverse – 2 9 mph (14 kph)
Reverse – 3 15 mph (24 kph)
Reverse – 4 23 mph (37 kph)
Transmission Type Powershift

Weights

Operating Weight 52,254 lbs (23,702 kg)
Operational Weight 52,254 lbs (23,702 kg)
Ask A Question