Caterpillar IT28G Wheel Loader

Bucket

Bucket Width 8 ft (3 m)
Digging depth 0 ft (0 m)
Dump Clearance at Max Raise 10 ft (3 m)
Dumping angle, top 45 degrees

Dimensions

Dump Clearance at Max Lift 10 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Hinge Pin Max Height 13 ft (4 m)
Length w/ Bucket on Ground 24 ft (7 m)
Length with out Forks on Ground 25 ft (8 m)
Length with Bucket on Ground 24 ft (7 m)
Max Lift Height 13 ft (4 m)
Reach at Max Height and Dump 3 ft (1 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 10 ft (3 m)
Width Over Tires 8 ft (3 m)

Engine

Bore 4 in (10 cm)
Displacement 366 cu in (6,001 cu cm)
Engine Model 3116T
Gross Power 156 hp (116 kw)
Net Power 145 hp (108 kw)
Power Measured @ 2300 rpm
Stroke 5 in (13 cm)

Hydraulic System

Dump Time 1.4 seconds
Lower Time 2.8 seconds
Pump Flow Capacity 28 gpm (104 lpm)
Raise Time 6.1 seconds
Relief Valve Setting 3002.3 psi

Operating Specifications

Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 11 gal (42 l)
Engine Oil Capacity 4 gal (16 l)
Front Axle/Diff Fluid Capacity 7 gal (26 l)
Front Diff Fluid Capacity 7 gal (26 l)
Fuel Capacity 57 gal (216 l)
Hydraulic System Fluid Capacity 33 gal (125 l)
Operating Voltage 24 volts
Rear Axle Oscillation 11 degrees
Rear Axle/Diff Fluid Capacity 7 gal (25 l)
Rear Diff Fluid Capacity 7 gal (25 l)
Static Tipping Load – Bucket 19,917 lbs (9,034 kg)
Static Tipping Load – Material Handler 11,806 lbs (5,355 kg)
Tire Size 20.5R25 L3 XHA
Transmission Fluid Capacity 9 gal (35 l)
Turning Radius 17 ft (5 m)

Transmission

Max Speed – Forward 38 mph (61 kph)
Max Speed – Reverse 26 mph (42 kph)
Max Speed Forward 24 mph (38 kph)
Max Speed Reverse 16 mph (26 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Ask A Question