Contents
Axles
| Front | Fixed front |
| Maximum Single-Wheel Rise and Fall | 17 in (43 cm) |
Brakes
| Brakes | Meets required standards |
Bucket
| Breakout Force | 28,326 lbs (12,848 kg) |
| Bucket Capacities | 4 cu yd (3 cu m) |
| Bucket Capacity – heaped | 4 cu yd (3 cu m) |
| Bucket Capacity – struck | 3 cu yd (2 cu m) |
| Maximum Bucket Capacity | 4 cu yd (3 cu m) |
Dimensions
| Dump Clearance at Max Lift | 9 ft (3 m) |
| Fork Tine Length | 5 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 11 ft (3 m) |
| Height at Hook Max Reach | 6 ft (2 m) |
| Hinge Pin Max Height | 13 ft (4 m) |
| Length w/ Bucket on Ground | 25 ft (8 m) |
| Length with out Forks on Ground | 27 ft (8 m) |
| Max Lift Height | 12 ft (4 m) |
| Reach at Max Height and Dump | 4 ft (1 m) |
| Wheelbase | 10 ft (3 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Bore | 4 in (10 cm) |
| Displacement | 403 cu in (6,601 cu cm) |
| Engine Model | Cat 6.6 ACERT |
| Gross Power | 197 hp (147 kw) |
| Gross Power – SAE J1995 | 197 hp (147 kw) |
| Max Torque | 620 lbs ft (841 nm) |
| Net Power | 178 hp (133 kw) |
| Net Power – 80/1269/EEC | 180 hp (134 kw) |
| Net Power – ISO 9249 | 180 hp (134 kw) |
| Net Power – SAE J1349 | 178 hp (133 kw) |
| Peak Torque – 1,400 rpm – Net | 620 lbs ft (841 nm) |
| Power Measured @ | 2100 rpm |
| Stroke | 5 in (13 cm) |
| Torque Measured @ | 1400 rpm |
| Total Torque Rise | 0.38 |
Hydraulic System
| Dump Time | 2 seconds |
| Hydraulic Cycle Time – Dump | 1.4 seconds |
| Hydraulic Cycle Time – Lower, Empty, Float Down | 2.7 seconds |
| Hydraulic Cycle Time – Raise | 5.4 seconds |
| Hydraulic Cycle Time – Total | 9.5 seconds |
| Lower Time | 2.7 seconds |
| Pilot System – Pump Output | 78 gpm (295 lpm) |
| Pump Flow Capacity | 78 gpm (295 lpm) |
| Pump Type | Piston |
| Raise Time | 5 seconds |
| Relief Valve Setting | 1000 psi |
| Steering System – Pump Type | Piston |
Operating Specifications
| Alternator Supplied Amperage | 65 amps |
| Breakout Force | 27,576 lbs (12,508 kg) |
| Cooling System Fluid Capacity | 10 gal (36 l) |
| Engine Oil Capacity | 5 gal (17 l) |
| Front Diff Fluid Capacity | 15 gal (57 l) |
| Fuel Capacity | 65 gal (247 l) |
| Hydraulic System Fluid Capacity | 24 gal (89 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 35,283 lbs (16,004 kg) |
| Rear Axle Oscillation | 12 degrees |
| Rear Diff Fluid Capacity | 14 gal (53 l) |
| Static Tipping Load – Bucket | 23,918 lbs (10,849 kg) |
| Static Tipping Load – Forks | 19,546 lbs (8,866 kg) |
| Static Tipping Load – Full Turn | 22,207 lbs (10,073 kg) |
| Static Tipping Load – Material Handler | 11,599 lbs (5,261 kg) |
| Tire Size | 20.5-R25 |
| Transmission Fluid Capacity | 11 gal (43 l) |
| Turning Radius | 20 ft (6 m) |
Service Refill Capacities
| Cooling System | 10 gal (36 l) |
| Crankcase | 5 gal (17 l) |
| Differential – Final Drives – Front | 15 gal (57 l) |
| Differential – Final Drives – Rear | 14 gal (53 l) |
| Fuel Tank – Standard | 65 gal (247 l) |
| Hydraulic Tank | 24 gal (89 l) |
| Transmission | 11 gal (43 l) |
Transmission
| Forward – 1 | 5 mph (8 kph) |
| Forward – 2 | 9 mph (15 kph) |
| Forward – 3 | 16 mph (25 kph) |
| Forward – 4 | 27 mph (43 kph) |
| Max Speed Forward | 27 mph (43 kph) |
| Max Speed Reverse | 16 mph (26 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Reverse – 1 | 5 mph (8 kph) |
| Reverse – 2 | 9 mph (15 kph) |
| Reverse – 3 | 16 mph (25 kph) |
Weights
| Operating Weight | 33,190 lbs (15,055 kg) |
