JCB 411 HT Wheel Loader

Bucket

Breakout Force 16,456 lbs (7,464 kg)
Bucket Capacity – heaped 2 cu yd (1 cu m)
Bucket Capacity – struck 1 cu yd (1 cu m)
Bucket Width 7 ft (2 m)
Dump Clearance at Max Raise 8 ft (3 m)
Dump Clearance at Max Raise 9 ft (3 m)

Dimensions

Dump Clearance at Max Lift 9 ft (3 m)
Fork Tine Length 4 ft (1 m)
Height – Top of Cab 10 ft (3 m)
Hinge Pin – Max Height 12 ft (4 m)
Hinge Pin Max Height 12 ft (4 m)
Length w/ Bucket on Ground 20 ft (6 m)
Length with Bucket on Ground 21 ft (6 m)
Max Lift Height 11 ft (3 m)
Reach at Max Height and Dump 3 ft (1 m)
Reach at Max Lift and Dump 3 ft (1 m)
Width Over Tires 7 ft (2 m)

Engine

Bore 4 in (10 cm)
Engine Type 4 stroke direct injection
Make JCB
Max Torque 313 lbs ft (424 nm)
Model Diesel
Net Power 93 hp (69 kw)
Number of Cylinders 4
Power Measured @ 2200 rpm
Stroke 5 in (13 cm)

Hydraulic System

3190.8 220 bar psi
Dump Time 1.1 seconds
Lower Time 3.7 seconds
Pump Type Double gear pump
Raise Time 5 seconds
Relief Valve Setting 3190 psi
Total cycle 9.8 seconds

Operating Specifications

Articulation Angle 40 degrees
Auxiliary fuel tank 29 gal (111 l)
DEF tank capacity 5 gal (20 l)
Engine Oil Capacity 3 gal (11 l)
Engine Oil Fluid Capacity 3 gal (12 l)
Front Axle/Diff Fluid Capacity 7 gal (25 l)
Front Diff Fluid Capacity 7 gal (25 l)
Operating Voltage 24 volts
Rated Bucket Capacity 2 cu yd (1 cu m)
Rear Axle/Diff Fluid Capacity 7 gal (25 l)
Rear Diff Fluid Capacity 7 gal (25 l)
Static Tipping Load – Bucket 13,574 lbs (6,157 kg)
Static Tipping Load – Forks 9,533 lbs (4,324 kg)
Static Tipping Weight 11,835 lbs (5,368 kg)
Turning Radius 18 ft (5 m)

Transmission

Max Speed – Forward 31 mph (50 kph)
Max Speed – Reverse 24 mph (38 kph)
Max Speed Forward 23 mph (37 kph)
Max Speed Reverse 17 mph (28 kph)
Number of Forward Gears 4
Number of Reverse Gears 3

Weights

Operational Weight 19,153 lbs (8,688 kg)
Ask A Question