JCB 411 ZX Wheel Loader

Bucket

Bucket Capacity – heaped 1 cu yd (1 cu m)
Bucket Capacity – struck 1 cu yd (1 cu m)

Dimensions

Dump Clearance at Max Lift 8 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Height – Top of Cab 9 ft (3 m)
Hinge Pin Max Height 10 ft (3 m)
Length w/ Bucket on Ground 17 ft (5 m)
Max Lift Height 10 ft (3 m)
Reach at Max Height and Dump 2 ft (1 m)
Wheelbase 7 ft (2 m)
Width Over Tires 6 ft (2 m)

Engine

Aspiration Natural aspirated
Displacement 269 cu in (4,400 cu cm)
Engine Model 1104C-44
Gross Power 75 hp (56 kw)
Max Torque 223 lbs ft (302 nm)
Net Power 67 hp (50 kw)
Power Measured @ 2000 rpm
Torque Measured @ 1400 rpm

Hydraulic System

Dump Time 1 seconds
Lower Time 3.2 seconds
Pump Flow Capacity 18 gpm (66 lpm)
Pump Type Gear
Raise Time 5 seconds
Relief Valve Setting 3191 psi

Operating Specifications

Alternator Supplied Amperage 75 amps
Cooling System Fluid Capacity 4 gal (16 l)
Engine Oil Capacity 3 gal (9 l)
Front Diff Fluid Capacity 3 gal (10 l)
Fuel Capacity 27 gal (100 l)
Hydraulic System Fluid Capacity 23 gal (85 l)
Operating Voltage 12 volts
Operating Weight 11,574 lbs (5,250 kg)
Rear Axle Oscillation 9 degrees
Rear Diff Fluid Capacity 3 gal (11 l)
Static Tipping Load – Bucket 6,810 lbs (3,089 kg)
Static Tipping Load – Forks 9,193 lbs (4,170 kg)
Transmission Fluid Capacity 23 gal (85 l)
Turning Radius 12 ft (4 m)

Transmission

Max Speed Forward 13 mph (20 kph)
Max Speed Reverse 13 mph (20 kph)
Number of Forward Gears 2
Number of Reverse Gears 2
Transmission Type Hydrostatic
Ask A Question