JCB 412S Wheel Loader

Bucket

Breakout Force 12,972 lbs (5,884 kg)
Bucket Capacity – heaped 1 cu yd (1 cu m)
Bucket Capacity – struck 1 cu yd (1 cu m)
Bucket Width 8 ft (2 m)
Dump Clearance at Max Raise 11 ft (3 m)

Dimensions

Dump Clearance at Max Lift 9 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Hinge Pin Max Height 12 ft (4 m)
Length w/ Bucket on Ground 20 ft (6 m)
Length with Bucket on Ground 20 ft (6 m)
Max Lift Height 11 ft (3 m)
Reach at Max Height and Dump 4 ft (1 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheelbase 9 ft (3 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration turbocharged
Engine Model 444
Max Torque 320 lbs ft (434 nm)
Number of Cylinders 4
Power Measured @ 2200 rpm
Torque Measured @ 1400 rpm

Hydraulic System

Dump Time 1.4 seconds
Lower Time 3 seconds
Pump Type twin gear pumps
Raise Time 4.6 seconds
Relief Valve Setting 3190 psi

Operating Specifications

Alternator Supplied Amperage 55 amps
Cooling System Fluid Capacity 6 gal (22 l)
Engine Oil Capacity 3 gal (11 l)
Engine Oil Fluid Capacity 3 gal (11 l)
Front Axle/Diff Fluid Capacity 7 gal (25 l)
Front Diff Fluid Capacity 7 gal (25 l)
Fuel Capacity 33 gal (125 l)
Hydraulic System Fluid Capacity 29 gal (110 l)
Operating Voltage 24 volts
Operating Weight 18,038 lbs (8,182 kg)
Rear Axle Oscillation 25 degrees
Rear Axle/Diff Fluid Capacity 7 gal (25 l)
Rear Diff Fluid Capacity 7 gal (25 l)
Static Tipping Load – Bucket 8,755 lbs (3,971 kg)
Static Tipping Load – Forks 7,372 lbs (3,344 kg)
Static Tipping Weight 8,755 lbs (3,971 kg)
Transmission Fluid Capacity 6 gal (24 l)
Turning Radius 18 ft (5 m)

Transmission

Max Speed – Forward 23 mph (36 kph)
Max Speed – Reverse 16 mph (26 kph)
Max Speed Forward 24 mph (38 kph)
Max Speed Reverse 17 mph (27 kph)
Number of Forward Gears 6
Number of Reverse Gears 3
Transmission Type smooth shift powershift
Ask A Question