JCB 413S HT HL Wheel Loader

Bucket

Breakout Force 16,456 lbs (7,464 kg)
Bucket Capacity – heaped 2 cu yd (1 cu m)
Bucket Capacity – struck 1 cu yd (1 cu m)
Bucket Width 7 ft (2 m)
Dump Clearance at Max Raise 10 ft (3 m)

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 10 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length with Bucket on Ground 22 ft (7 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 9 ft (3 m)
Width Over Tires 8 ft (2 m)

Engine

Air cleaner Cyclonic pre filter with engine fan scavenge system
Aspiration Turbo charged
Displacement 293 cu in (4,801 cu cm)
Emission Tier Level Tier 4 Final
Engine Model JCB EcoMAX T4F
Gross Power 145 hp (108 kw)
No. of Valves 4
Number of Cylinders 4
Power Measured @ 2200 rpm
Torque Measured @ 1500 rpm

Hydraulic System

3480.9 240 bar psi
Dump Time 1.7 seconds
Lower Time 2.8 seconds
Pump Flow Capacity 41 gpm (156 lpm)
Pump Type Variable placement piston pump
Raise Time 4.4 seconds
Relief Valve Setting 3190 psi
Total cycle 8.9 seconds

Operating Specifications

Alternator Supplied Amperage 100 amps
Articulation Angle 40 degrees
Auxiliary fuel tank 29 gal (111 l)
DEF tank capacity 5 gal (20 l)
Fuel Capacity 31 gal (116 l)
Full turn tipping load 11,349 lbs (5,148 kg)
Hydraulic System Fluid Capacity 41 gal (155 l)
Operating Voltage 24 volts
Operating Weight 20,144 lbs (9,137 kg)
Payload 5,675 lbs (2,574 kg)
Rear Axle Oscillation 11 degrees
Turning Radius 18 ft (6 m)

Transmission

Max Speed – Forward 31 mph (50 kph)
Max Speed – Reverse 24 mph (39 kph)
Number of Forward Gears 6
Number of Reverse Gears 3
Transmission Type 6 speed non-lock up converter ZF 6WG115
Ask A Question