JCB 426BHT Wheel Loader

Bucket

Breakout Force 27,427 lbs (12,441 kg)
Bucket Capacity – heaped 2 cu yd (2 cu m)
Bucket Width 8 ft (2 m)
Dump Clearance at Max Raise 10 ft (3 m)

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 10 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length with Bucket on Ground 22 ft (7 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 10 ft (3 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration turbocharged
Displacement 365 cu in (5,986 cu cm)
Engine Model 1006-60T
Gross Power 144 hp (107 kw)
Net Power 132 hp (98 kw)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1400 rpm

Hydraulic System

Dump Time 1.5 seconds
Lower Time 3.4 seconds
Pump Flow Capacity 58 gpm (220 lpm)
Pump Type variable displacement piston pumps with load sensing system
Raise Time 4.8 seconds
Relief Valve Setting 3212 psi

Operating Specifications

Alternator Supplied Amperage 55 amps
Cooling System Fluid Capacity 13 gal (50 l)
Engine Oil Fluid Capacity 4 gal (15 l)
Front Axle/Diff Fluid Capacity 7 gal (26 l)
Fuel Capacity 56 gal (212 l)
Hydraulic System Fluid Capacity 56 gal (210 l)
Operating Voltage 24 volts
Rear Axle Oscillation 25 degrees
Rear Axle/Diff Fluid Capacity 7 gal (26 l)
Tire Size 17.5x25x12 ply (L2)
Transmission Fluid Capacity 6 gal (23 l)

Transmission

Max Speed – Forward 24 mph (38 kph)
Max Speed – Reverse 17 mph (27 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type 4 wheel drive, semi-autoshift full powershift
Ask A Question