JCB 426HTM Wheel Loader

Bucket

Breakout Force 31,024 lbs (14,072 kg)
Bucket Capacity – heaped 2 cu yd (2 cu m)
Bucket Capacity – struck 2 cu yd (2 cu m)
Bucket Width 8 ft (3 m)
Dump Clearance at Max Raise 9 ft (3 m)

Dimensions

Dump Clearance at Max Lift 9 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 2 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin – Max Height 12 ft (4 m)
Length with Bucket on Ground 22 ft (7 m)
Max Lift Height 12 ft (4 m)
Reach at Max Height and Dump 4 ft (1 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheelbase 10 ft (3 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration turbocharged
Displacement 360 cu in (5,901 cu cm)
Engine Model BTAA5.9C
Gross Power 152 hp (113 kw)
Max Torque 336 lbs ft (455 nm)
Net Power 150 hp (112 kw)
Number of Cylinders 6
Torque Measured @ 1600 rpm

Hydraulic System

Dump Time 1 seconds
Lower Time 2.7 seconds
Raise Time 4.4 seconds
Relief Valve Setting 3625 psi

Operating Specifications

Alternator Supplied Amperage 70 amps
Cooling System Fluid Capacity 9 gal (35 l)
Engine Oil Capacity 4 gal (14 l)
Engine Oil Fluid Capacity 4 gal (14 l)
Front Axle/Diff Fluid Capacity 10 gal (39 l)
Front Diff Fluid Capacity 10 gal (39 l)
Hydraulic System Fluid Capacity 56 gal (210 l)
Operating Voltage 24 volts
Operating Weight 31,328 lbs (14,210 kg)
Rear Axle Oscillation 25 degrees
Rear Axle/Diff Fluid Capacity 10 gal (37 l)
Rear Diff Fluid Capacity 10 gal (37 l)
Static Tipping Load – Forks 14,771 lbs (6,700 kg)
Static Tipping Weight 19,158 lbs (8,690 kg)
Transmission Fluid Capacity 8 gal (30 l)
Turning Radius 19 ft (6 m)

Transmission

Max Speed – Forward 24 mph (39 kph)
Max Speed – Reverse 15 mph (24 kph)
Max Speed Forward 24 mph (39 kph)
Max Speed Reverse 15 mph (24 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Ask A Question