JCB 436HT Wheel Loader

Bucket

Breakout Force 33,047 lbs (14,990 kg)
Bucket Capacity – heaped 3 cu yd (2 cu m)
Bucket Width 9 ft (3 m)
Dump Clearance at Max Raise 9 ft (3 m)

Dimensions

Dump Clearance at Max Lift 10 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 2 ft (0 m)
Hinge Pin – Max Height 12 ft (4 m)
Hinge Pin Max Height 13 ft (4 m)
Length w/ Bucket on Ground 23 ft (7 m)
Length with Bucket on Ground 23 ft (7 m)
Max Lift Height 13 ft (4 m)
Reach at Max Height and Dump 4 ft (1 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheelbase 10 ft (3 m)
Width Over Tires 9 ft (3 m)

Engine

Aspiration Turbocharged
Displacement 360 cu in (5,901 cu cm)
Engine Model BTAA 5.9C
Gross Power 177 hp (132 kw)
Max Torque 580 lbs ft (786 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1300 rpm

Hydraulic System

Dump Time 1 seconds
Lower Time 3.4 seconds
Pump Type Twin variable displacement piston pumps
Raise Time 5.9 seconds
Relief Valve Setting 3625 psi

Operating Specifications

Alternator Supplied Amperage 70 amps
Cooling System Fluid Capacity 9 gal (35 l)
Engine Oil Capacity 4 gal (14 l)
Engine Oil Fluid Capacity 4 gal (14 l)
Front Axle/Diff Fluid Capacity 10 gal (39 l)
Front Diff Fluid Capacity 10 gal (39 l)
Fuel Capacity 61 gal (230 l)
Hydraulic System Fluid Capacity 56 gal (210 l)
Operating Voltage 24 volts
Rear Axle Oscillation 21 degrees
Rear Axle/Diff Fluid Capacity 10 gal (39 l)
Rear Diff Fluid Capacity 10 gal (39 l)
Static Tipping Load – Bucket 26,780 lbs (12,147 kg)
Static Tipping Load – Forks 16,907 lbs (7,669 kg)
Static Tipping Weight 22,573 lbs (10,239 kg)
Turning Radius 19 ft (6 m)

Transmission

Max Speed – Forward 24 mph (39 kph)
Max Speed – Reverse 17 mph (27 kph)
Max Speed Forward 24 mph (38 kph)
Max Speed Reverse 17 mph (27 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type Smooth shift powershift
Ask A Question