John Deere 444H Wheel Loader

Bucket

Breakout Force 16,592 lbs (7,526 kg)
Bucket Capacity – heaped 3 cu yd (2 cu m)
Bucket Capacity – struck 2 cu yd (2 cu m)

Dimensions

Dump Clearance at Max Lift 9 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Height – Top of Cab 10 ft (3 m)
Hinge Pin Max Height 12 ft (4 m)
Hook Reach at Max Lift – extended 12 ft (4 m)
Length w/ Bucket on Ground 22 ft (7 m)
Length with out Forks on Ground 19 ft (6 m)
Max Lift Height 11 ft (3 m)
Reach at Max Height and Dump 4 ft (1 m)
Wheelbase 9 ft (3 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration Turbocharged
Displacement 276 cu in (4,523 cu cm)
Engine Model 4045T
Gross Power 115 hp (86 kw)
Max Torque 325 lbs ft (441 nm)
Net Power 110 hp (82 kw)
Number of Cylinders 4
Power Measured @ 2200 rpm
Torque Measured @ 1400 rpm

Hydraulic System

Dump Time 1.1 seconds
Lower Time 2.6 seconds
Pump Flow Capacity 36 gpm (136 lpm)
Pump Type Piston Pump
Raise Time 5 seconds
Relief Valve Setting 3600 psi

Operating Specifications

Alternator Supplied Amperage 55 amps
Cooling System Fluid Capacity 5 gal (19 l)
Engine Oil Capacity 3 gal (13 l)
Front Diff Fluid Capacity 4 gal (15 l)
Fuel Capacity 48 gal (182 l)
Hydraulic System Fluid Capacity 28 gal (106 l)
Operating Voltage 24 volts
Operating Weight 21,457 lbs (9,733 kg)
Rear Axle Oscillation 24 degrees
Rear Diff Fluid Capacity 4 gal (15 l)
Static Tipping Load – Bucket 16,021 lbs (7,267 kg)
Static Tipping Load – Forks 9,621 lbs (4,364 kg)
Static Tipping Load – Material Handler 7,145 lbs (3,241 kg)
Tire Size 17.5-25
Transmission Fluid Capacity 3 gal (13 l)
Turning Radius 16 ft (5 m)

Transmission

Max Speed Forward 25 mph (40 kph)
Max Speed Reverse 16 mph (26 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type Power Shift
Ask A Question