John Deere 544H Wheel Loader

Bucket

Breakout Force 22,487 lbs (10,200 kg)
Bucket Capacity – heaped 3 cu yd (2 cu m)
Bucket Capacity – struck 3 cu yd (2 cu m)

Dimensions

Dump Clearance at Max Lift 9 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin Max Height 13 ft (4 m)
Hook Height at Max Lift – standard 19 ft (6 m)
Length w/ Bucket on Ground 24 ft (7 m)
Length with out Forks on Ground 19 ft (6 m)
Length with Bucket on Ground 24 ft (7 m)
Max Lift Height 12 ft (4 m)
Reach at Max Height and Dump 3 ft (1 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration Turbocharged
Displacement 414 cu in (6,784 cu cm)
Engine Model 6068T
Max Torque 440 lbs ft (597 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1300 rpm

Hydraulic System

Dump Time 1.2 seconds
Lower Time 2.9 seconds
Pump Flow Capacity 41 gpm (155 lpm)
Pump Type Piston Pump
Raise Time 5.8 seconds
Relief Valve Setting 3600 psi

Operating Specifications

Alternator Supplied Amperage 55 amps
Cooling System Fluid Capacity 6 gal (23 l)
Engine Oil Capacity 5 gal (18 l)
Engine Oil Fluid Capacity 5 gal (18 l)
Front Axle/Diff Fluid Capacity 5 gal (19 l)
Front Diff Fluid Capacity 5 gal (19 l)
Fuel Capacity 65 gal (246 l)
Hydraulic System Fluid Capacity 28 gal (106 l)
Operating Voltage 24 volts
Operating Weight 25,873 lbs (11,736 kg)
Rear Axle Oscillation 28 degrees
Rear Axle/Diff Fluid Capacity 5 gal (19 l)
Rear Diff Fluid Capacity 5 gal (19 l)
Static Tipping Load – Bucket 20,106 lbs (9,120 kg)
Static Tipping Load – Forks 12,498 lbs (5,669 kg)
Static Tipping Load – Material Handler 9,389 lbs (4,259 kg)
Tire Size 17.5-25
Transmission Fluid Capacity 5 gal (20 l)
Turning Radius 16 ft (5 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 16 mph (25 kph)
Max Speed Forward 25 mph (40 kph)
Max Speed Reverse 16 mph (25 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Ask A Question