John Deere 744K High-Lift Wheel Loader

Bucket

Breakout Force 38,433 lbs (17,433 kg)
Bucket Capacity – heaped 5 cu yd (4 cu m)
Bucket Capacity – struck 5 cu yd (3 cu m)
Bucket Width 11 ft (3 m)
Dump Clearance at Max Raise 12 ft (4 m)

Dimensions

Ground Clearance 2 ft (0 m)
Height – Top of Cab 12 ft (4 m)
Hinge Pin – Max Height 16 ft (5 m)
Length with Bucket on Ground 32 ft (10 m)
Reach at Max Lift and Dump 5 ft (1 m)
Wheelbase 11 ft (3 m)
Width Over Tires 10 ft (3 m)

Engine

Aspiration Turbocharged charge air cooled
Displacement 548 cu in (8,980 cu cm)
Engine Model 6090H, Tier III certified
Net Power 304 hp (227 kw)
Number of Cylinders 6
Power Measured @ 1500 rpm
Torque Measured @ 1400 rpm
Torque Rise 47%

Hydraulic System

Dump Time 1.4 seconds
Lower Time 2.8 seconds
Pump Flow Capacity 136 gpm (515 lpm)
Pump Type two variable displacement, load-sensing axial piston
Raise Time 5.9 seconds
Relief Valve Setting 3288 psi

Operating Specifications

Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 12 gal (45 l)
Engine Oil Fluid Capacity 9 gal (34 l)
Front Axle/Diff Fluid Capacity 12 gal (46 l)
Fuel Capacity 124 gal (469 l)
Hydraulic System Fluid Capacity 42 gal (159 l)
Operating Voltage 24 volts
Operating Weight 54,527 lbs (24,733 kg)
Rear Axle Oscillation 26 degrees
Rear Axle/Diff Fluid Capacity 12 gal (46 l)
Static Tipping Weight 34,785 lbs (15,778 kg)
Tire Size 26.5 R 25
Transmission Fluid Capacity 7 gal (28 l)
Turning Radius 21 ft (6 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 19 mph (30 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type Countershaft, powershift
Ask A Question