John Deere TC62H Wheel Loader

Bucket

Breakout Force 27,091 lbs (12,288 kg)
Bucket Capacity – heaped 4 cu yd (3 cu m)
Bucket Capacity – struck 3 cu yd (2 cu m)

Dimensions

Dump Clearance at Max Lift 10 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Height at Hook Max Reach 7 ft (2 m)
Hinge Pin Max Height 13 ft (4 m)
Hook Height at Max Lift – standard 19 ft (6 m)
Hook Max Reach – standard 12 ft (4 m)
Hook Reach at Max Lift – extended 12 ft (4 m)
Length w/ Bucket on Ground 25 ft (8 m)
Length with out Forks on Ground 26 ft (8 m)
Max Lift Height 13 ft (4 m)
Reach at Max Height and Dump 4 ft (1 m)
Wheelbase 10 ft (3 m)
Width Over Tires 9 ft (3 m)

Engine

Aspiration Turbocharger with Aftercooler
Displacement 414 cu in (6,784 cu cm)
Engine Model 6068H
Gross Power 172 hp (128 kw)
Max Torque 578 lbs ft (784 nm)
Net Power 160 hp (119 kw)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1300 rpm

Hydraulic System

Dump Time 1.7 seconds
Lower Time 3 seconds
Pump Flow Capacity 55 gpm (208 lpm)
Pump Type Piston Pump
Raise Time 5.8 seconds
Relief Valve Setting 3600 psi

Operating Specifications

Alternator Supplied Amperage 55 amps
Cooling System Fluid Capacity 6 gal (22 l)
Engine Oil Capacity 5 gal (20 l)
Front Diff Fluid Capacity 7 gal (27 l)
Fuel Capacity 70 gal (265 l)
Hydraulic System Fluid Capacity 31 gal (117 l)
Operating Voltage 24 volts
Operating Weight 30,532 lbs (13,849 kg)
Rear Axle Oscillation 26 degrees
Rear Diff Fluid Capacity 6 gal (21 l)
Static Tipping Load – Bucket 21,506 lbs (9,755 kg)
Static Tipping Load – Forks 16,636 lbs (7,546 kg)
Static Tipping Load – Material Handler 11,036 lbs (5,006 kg)
Tire Size 20.5-25
Transmission Fluid Capacity 7 gal (27 l)
Turning Radius 17 ft (5 m)

Transmission

Max Speed Forward 25 mph (39 kph)
Max Speed Reverse 15 mph (24 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type Power Shift
Ask A Question