Liebherr L526 Wheel Loader

Bucket

Arm length 9 ft (3 m)
Breakout Force 22,480 lbs (10,197 kg)
Bucket Capacity – heaped 3 cu yd (2 cu m)
Bucket Width 8 ft (2 m)
Digging depth 5 ft (2 m)
Dump Clearance at Max Raise 9 ft (3 m)

Dimensions

Ground Clearance 2 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length with Bucket on Ground 25 ft (8 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 10 ft (3 m)

Electrical System

Alternator 24/100 (V/A)
Battery 2 x 135 Ah
Starter 24/10.5 (V/HP)
Voltage 24 V

Engine

Air cleaner Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display
Aspiration Water-cooled turbocharged in-line engine with� cooled exhaust gas recirculation, exhaust after-treatment with a closed diesel particle filter system and SCR technology
Bore 4 in (11 cm)
Displacement 275 cu in (4,506 cu cm)
Engine Model 4045HLC07
Fuel injection Electronic Common Rail high-pressure injection
Gross Power 138 hp (103 kw)
Max Torque 404 lbs ft (548 nm)
Net Power 135 hp (101 kw)
Number of Cylinders 4
Power Measured @ 2000 rpm
Stroke 5 in (13 cm)
Torque Measured @ 1500 rpm

Hydraulic System

Dump Time 2.1 seconds
Lower Time 3.6 seconds
Pump Flow Capacity 36 gpm (136 lpm)
Pump Type Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block
Raise Time 5.3 seconds
Relief Valve Setting 4351.2 psi

Operating Specifications

Cooling System Fluid Capacity 8 gal (31 l)
Engine Oil Fluid Capacity 6 gal (22 l)
Front Axle/Diff Fluid Capacity 4 gal (16 l)
Fuel Capacity 54 gal (205 l)
Hydraulic Fluid Capacity 25 gal (95 l)
Hydraulic System Fluid Capacity 45 gal (170 l)
Operating Weight 24,800 lbs (11,249 kg)
Rear Axle/Diff Fluid Capacity 4 gal (16 l)
Static Tipping Weight 16,975 lbs (7,700 kg)
Tire Size 17.5R25 L3
Transmission Fluid Capacity 1 gal (3 l)
Turning Radius 20 ft (6 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 25 mph (40 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Ask A Question