Liebherr L542 Wheel Loader

Bucket

Arm length 8 ft (2 m)
Breakout Force 24,055 lbs (10,911 kg)
Bucket Capacity – heaped 4 cu yd (3 cu m)
Bucket Width 8 ft (2 m)
Digging depth 2 ft (1 m)
Dump Clearance at Max Raise 8 ft (2 m)

Dimensions

Ground Clearance 2 ft (1 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length with Bucket on Ground 24 ft (7 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheelbase 10 ft (3 m)

Electrical System

Alternator 24/100 (V/A)
Battery 2 x 135 Ah
Starter 24/10.5 (V/HP)
Voltage 24 V

Engine

Air cleaner Dry air filter with main and safety element, pre-cleaner, service indicator on the display
Aspiration Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter
Bore 4 in (11 cm)
Displacement 275 cu in (4,506 cu cm)
Engine Model 4045HFL93
Fuel injection Electronic Common Rail high-pressure injection
Gross Power 161 hp (120 kw)
Max Torque 476 lbs ft (645 nm)
Number of Cylinders 4
Power Measured @ 2000 rpm
Stroke 5 in (13 cm)
Torque Measured @ 1600 rpm

Hydraulic System

Dump Time 1.6 seconds
Lower Time 4 seconds
Pump Flow Capacity 45 gpm (170 lpm)
Pump Type Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block
Raise Time 5.3 seconds
Relief Valve Setting 4351.2 psi

Operating Specifications

Cooling System Fluid Capacity 10 gal (38 l)
Engine Oil Fluid Capacity 5 gal (20 l)
Front Axle/Diff Fluid Capacity 4 gal (16 l)
Fuel Capacity 54 gal (205 l)
Hydraulic Fluid Capacity 29 gal (110 l)
Hydraulic System Fluid Capacity 48 gal (180 l)
Operating Weight 29,540 lbs (13,399 kg)
Rear Axle/Diff Fluid Capacity 4 gal (15 l)
Static Tipping Weight 22,485 lbs (10,199 kg)
Tire Size 20.5R25 L3
Transmission Fluid Capacity 1 gal (4 l)
Turning Radius 20 ft (6 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 25 mph (40 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Ask A Question