Bucket
Arm length | 9 ft (3 m) |
Breakout Force | 29,225 lbs (13,256 kg) |
Bucket Capacity – heaped | 4 cu yd (3 cu m) |
Bucket Width | 8 ft (2 m) |
Digging depth | 3 ft (1 m) |
Dump Clearance at Max Raise | 9 ft (3 m) |
Dimensions
Ground Clearance | 2 ft (1 m) |
Height – Top of Cab | 11 ft (3 m) |
Hinge Pin – Max Height | 13 ft (4 m) |
Length with Bucket on Ground | 28 ft (9 m) |
Reach at Max Lift and Dump | 3 ft (1 m) |
Wheelbase | 11 ft (3 m) |
Electrical System
Alternator | 28/140 (V/A) |
Battery | 2 x 180 Ah |
Starter | 24/10.5 (V/HP) |
Voltage | 24 V |
Engine
Air cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
Bore | 5 in (13 cm) |
Displacement | 486 cu in (7,964 cu cm) |
Engine Model | D944 A7 |
Fuel injection | Electronic Common Rail high-pressure injection |
Gross Power | 225 hp (168 kw) |
Max Torque | 1,055 lbs ft (1,430 nm) |
Net Power | 221 hp (165 kw) |
Number of Cylinders | 4 |
Power Measured @ | 1800 rpm |
Stroke | 6 in (15 cm) |
Torque Measured @ | 1100 rpm |
Hydraulic System
Dump Time | 2.3 seconds |
Lower Time | 2.7 seconds |
Pump Flow Capacity | 62 gpm (235 lpm) |
Pump Type | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
Raise Time | 5.5 seconds |
Relief Valve Setting | 4351.2 psi |
Operating Specifications
Cooling System Fluid Capacity | 18 gal (67 l) |
Engine Oil Fluid Capacity | 7 gal (26 l) |
Front Axle/Diff Fluid Capacity | 11 gal (42 l) |
Fuel Capacity | 74 gal (280 l) |
Hydraulic Fluid Capacity | 28 gal (105 l) |
Hydraulic System Fluid Capacity | 46 gal (175 l) |
Operating Weight | 40,565 lbs (18,400 kg) |
Rear Axle/Diff Fluid Capacity | 9 gal (35 l) |
Static Tipping Weight | 30,205 lbs (13,701 kg) |
Tire Size | 23.5R25 L3 |
Turning Radius | 21 ft (6 m) |