Bucket
| Breakout Force | 39,342 lbs (17,845 kg) |
| Bucket Capacity – heaped | 6 cu yd (5 cu m) |
| Bucket Width | 10 ft (3 m) |
| Dump Clearance at Max Raise | 11 ft (3 m) |
Dimensions
| Ground Clearance | 2 ft (1 m) |
| Height – Top of Cab | 12 ft (4 m) |
| Hinge Pin – Max Height | 15 ft (5 m) |
| Length with Bucket on Ground | 30 ft (9 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 11 ft (3 m) |
Engine
| Aspiration | Inline engine, water-cooled exhaust-turbo charged with intercooler |
| Displacement | 608 cu in (9,960 cu cm) |
| Engine Model | D 926 TI-E A2 |
| Gross Power | 265 hp (198 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1200 rpm |
Hydraulic System
| Dump Time | 2 seconds |
| Lower Time | 3.5 seconds |
| Pump Flow Capacity | 77 gpm (290 lpm) |
| Pump Type | Load-sensing, variable axial piston pump with output control and pressure cutoff |
| Raise Time | 5.6 seconds |
| Relief Valve Setting | 5076.4 psi |
Operating Specifications
| Alternator Supplied Amperage | 55 amps |
| Engine Oil Fluid Capacity | 6 gal (24 l) |
| Front Axle/Diff Fluid Capacity | 14 gal (51 l) |
| Fuel Capacity | 87 gal (330 l) |
| Hydraulic System Fluid Capacity | 64 gal (240 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 53,462 lbs (24,250 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 14 gal (51 l) |
| Static Tipping Weight | 40,455 lbs (18,350 kg) |
| Tire Size | 26.5 R 25 |
| Turning Radius | 23 ft (7 m) |
Transmission
| Max Speed – Forward | 25 mph (40 kph) |
| Max Speed – Reverse | 25 mph (40 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | Stepless hydrostatic travel drive 2plus2 |
