Liebherr L580 XPOWER Wheel Loader

Bucket

Arm length 10 ft (3 m)
Breakout Force 50,580 lbs (22,943 kg)
Bucket Capacity – heaped 7 cu yd (5 cu m)
Bucket Width 9 ft (3 m)
Digging depth 4 ft (1 m)
Dump Clearance at Max Raise 11 ft (3 m)

Dimensions

Ground Clearance 2 ft (0 m)
Height – Top of Cab 12 ft (4 m)
Hinge Pin – Max Height 15 ft (5 m)
Length with Bucket on Ground 32 ft (10 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 12 ft (4 m)

Electrical System

Alternator 28/180 (V/A)
Battery 2 x 180 Ah
Starter 24/10.5 (V/HP)
Voltage 24 V

Engine

Air cleaner Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display
Aspiration Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology
Bore 5 in (12 cm)
Displacement 642 cu in (10,521 cu cm)
Engine Model D936 A7
Fuel injection Electronic Common Rail high-pressure injection
Gross Power 312 hp (233 kw)
Max Torque 1,450 lbs ft (1,966 nm)
Net Power 308 hp (230 kw)
Number of Cylinders 6
Power Measured @ 1800 rpm
Stroke 6 in (15 cm)
Torque Measured @ 1100 rpm

Hydraulic System

Dump Time 2 seconds
Lower Time 3.5 seconds
Pump Flow Capacity 84 gpm (318 lpm)
Pump Type Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block
Raise Time 6.1 seconds
Relief Valve Setting 4351.2 psi

Operating Specifications

Cooling System Fluid Capacity 19 gal (73 l)
Engine Oil Fluid Capacity 11 gal (40 l)
Front Axle/Diff Fluid Capacity 15 gal (58 l)
Fuel Capacity 96 gal (363 l)
Hydraulic Fluid Capacity 28 gal (105 l)
Hydraulic System Fluid Capacity 50 gal (190 l)
Operating Weight 60,955 lbs (27,649 kg)
Rear Axle/Diff Fluid Capacity 15 gal (58 l)
Static Tipping Weight 42,330 lbs (19,201 kg)
Tire Size 26.5R25 L3
Turning Radius 25 ft (8 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 25 mph (40 kph)
Ask A Question