Liebherr L586 XPOWER Wheel Loader

Bucket

Arm length 10 ft (3 m)
Breakout Force 53,954 lbs (24,473 kg)
Bucket Capacity – heaped 8 cu yd (6 cu m)
Bucket Width 11 ft (3 m)
Digging depth 4 ft (1 m)
Dump Clearance at Max Raise 11 ft (3 m)

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 12 ft (4 m)
Hinge Pin – Max Height 15 ft (5 m)
Length with Bucket on Ground 33 ft (10 m)
Reach at Max Lift and Dump 5 ft (1 m)
Wheelbase 12 ft (4 m)

Electrical System

Alternator 28/180 (V/A)
Battery 2 x 180 Ah
Starter 24/10.5 (V/HP)
Voltage 24 V

Engine

Air cleaner Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display
Aspiration Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology
Bore 5 in (12 cm)
Displacement 642 cu in (10,521 cu cm)
Engine Model D936 A7
Fuel injection Electronic Common Rail high-pressure injection
Gross Power 353 hp (263 kw)
Max Torque 1,450 lbs ft (1,966 nm)
Net Power 349 hp (260 kw)
Number of Cylinders 6
Power Measured @ 1800 rpm
Stroke 6 in (15 cm)
Torque Measured @ 1100 rpm

Hydraulic System

Dump Time 3 seconds
Lower Time 4 seconds
Pump Flow Capacity 108 gpm (409 lpm)
Pump Type Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block
Raise Time 6.5 seconds
Relief Valve Setting 4351.2 psi

Operating Specifications

Cooling System Fluid Capacity 19 gal (73 l)
Engine Oil Fluid Capacity 11 gal (40 l)
Front Axle/Diff Fluid Capacity 16 gal (60 l)
Fuel Capacity 132 gal (500 l)
Hydraulic Fluid Capacity 25 gal (95 l)
Hydraulic System Fluid Capacity 56 gal (210 l)
Operating Weight 71,870 lbs (32,600 kg)
Rear Axle/Diff Fluid Capacity 16 gal (60 l)
Static Tipping Weight 47,620 lbs (21,600 kg)
Tire Size 29.5R25 L3
Turning Radius 28 ft (8 m)

Transmission

Max Speed – Forward 21 mph (33 kph)
Max Speed – Reverse 21 mph (33 kph)
Ask A Question