Michigan L50 Wheel Loader

Bucket

Breakout Force 15,287 lbs (6,934 kg)
Bucket Capacity – heaped 2 cu yd (1 cu m)
Bucket Width 8 ft (2 m)
Dump Clearance at Max Raise 9 ft (3 m)

Dimensions

Dump Clearance at Max Lift 9 ft (3 m)
Fork Tine Length 4 ft (1 m)
Ground Clearance 1 ft (0 m)
Height – Top of Cab 10 ft (3 m)
Height at Hook Max Reach 5 ft (2 m)
Hinge Pin – Max Height 12 ft (4 m)
Hinge Pin Max Height 12 ft (4 m)
Length w/ Bucket on Ground 20 ft (6 m)
Length with out Forks on Ground 21 ft (6 m)
Length with Bucket on Ground 20 ft (6 m)
Max Lift Height 12 ft (4 m)
Reach at Max Height and Dump 3 ft (1 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 9 ft (3 m)
Width Over Tires 7 ft (2 m)

Engine

Aspiration direct injection
Displacement 273 cu in (4,474 cu cm)
Gross Power 90 hp (67 kw)
Max Torque 232 lbs ft (315 nm)
Net Power 82 hp (61 kw)
Number of Cylinders 4
Power Measured @ 2200 rpm
Torque Measured @ 1200 rpm

Hydraulic System

Dump Time 0.9 seconds
Lower Time 1.9 seconds
Pump Type vane
Raise Time 5.5 seconds
Relief Valve Setting 2975 psi

Operating Specifications

Alternator Supplied Amperage 60 amps
Engine Oil Capacity 3 gal (11 l)
Engine Oil Fluid Capacity 3 gal (11 l)
Front Axle/Diff Fluid Capacity 6 gal (23 l)
Front Diff Fluid Capacity 6 gal (23 l)
Fuel Capacity 42 gal (160 l)
Operating Voltage 24 volts
Rear Axle Oscillation 24 degrees
Rear Axle/Diff Fluid Capacity 6 gal (23 l)
Rear Diff Fluid Capacity 6 gal (23 l)
Static Tipping Load – Bucket 11,990 lbs (5,439 kg)
Static Tipping Load – Forks 6,614 lbs (3,000 kg)
Static Tipping Load – Material Handler 1,654 lbs (750 kg)
Static Tipping Weight 11,993 lbs (5,440 kg)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 16 mph (25 kph)
Max Speed Forward 25 mph (40 kph)
Max Speed Reverse 16 mph (25 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Ask A Question